Learning Nagios 3.0 is a comprehensive configuration guide to monitor and maintain your network and systems. It is a practical guide to setting up the Nagios 3.0 open source network monitoring tool, installing and configuring Nagios 3 on various operating systems. It will help understand system monitoring and how Nagios works.

Nagios provides a monitoring option to evaluate routers and switches using SNMP, Simple Network Management Protocol. This course will show you how to set up Nagios and specifically how to locate the information you want to monitor with SNMP on a Cisco router. This is a Free Course available to anyone.

Recently, Nagios, an open source application for network, server and application monitoring, has been the subject of a dispute. The operators of the French Nagios site nagios-fr.org claimed that Nagios Enterprises was forcing them to give up the domain. The H talked to Ethan Galstad CEO of Nagios Enterprises about what had happened and asked how he plans to take the Nagios community forward

This guide will describe howto get it running in op5 Monitor. op5 Monitor is vanilla Nagios with some addons so it should be no problem to follow this guide in a Nagios environment

Nagios is a free, open-source tool that can be used to monitor network components and services. When it detects a problem, it can send alert messages by either e-mail or pager. It can also be configured so that only designated personnel can view status information for particular services or equipment. This tutorial will show you how to install Nagios 3 on an Ubuntu 8.10 server.

As an administrator you may be face with the task of constantly monitoring web servers, mail servers, ftp servers, etc. Basically, your organization wants all of their servers up and running all of the time. Nagios 3 offers an easy set up and configuration to make this happen so that you can monitor multiple servers and have Nagios alert you to problems.

This is part two of a three part series on distributed monitoring. You can use passive service and host checks to allow non-central Nagios servers to collect data from a network of machines and then transfer that information to a central Nagios server.

Nagios is a host and service monitor designed to inform you of network problems before your clients, end-users or managers do. It has been designed to run under the Linux operating system, but works fine under most *NIX variants as well.

This Nagios Mini-Course shows you how to configure Passive Checks from clients which are sent to a central Nagios Server. Passive checks use the NSCA or Nagios Service Check Adaptor which is an add-on for the Nagios Server. You can write custom scripts to evaluate applications and send the output to a central Nagios Server.