Cacti uses SNMP (Simple Network Management Protocol) to monitor your server's network bandwidth, cpu loads, total ammounts of RAM and Hard Drive etc. To monitor your Linux server, you must have net-snmp installed.

Nagios provides a monitoring option to evaluate routers and switches using SNMP, Simple Network Management Protocol. This course will show you how to set up Nagios and specifically how to locate the information you want to monitor with SNMP on a Cisco router. This is a Free Course available to anyone.

Now that I am done with the implementation of RHE Cluster with GFS2, I now need to setup monitoring. As you all know, monitoring is a vital part of any environment. Even though we have a cluster of nodes setup, we still need to be aware of what is happening. I created two new commands. The first command is to emulate clustat, but through python and SNMP.

Learning Nagios 3.0 is a comprehensive configuration guide to monitor and maintain your network and systems. It is a practical guide to setting up the Nagios 3.0 open source network monitoring tool, installing and configuring Nagios 3 on various operating systems. It will help understand system monitoring and how Nagios works.

Zabbix is a solution for monitoring applications, networks, and servers. With Zabbix, you can monitor multiple servers at a time, using a Zabbix server that comes with a web interface (that is used to configure Zabbix and holds the graphs of your systems) and Zabbix agents that are installed on the systems to be monitored.

This Nagios Mini-Course shows you how to configure Passive Checks from clients which are sent to a central Nagios Server. Passive checks use the NSCA or Nagios Service Check Adaptor which is an add-on for the Nagios Server. You can write custom scripts to evaluate applications and send the output to a central Nagios Server.

Cacti is a web based PHP/MySql graphing solution using the RRDtool engine. Classically, it can graph network bandwidthes with SNMP. But in fact, a lot of different graphs can be done with snmp, shell or perl scripts.

As an administrator you may be face with the task of constantly monitoring web servers, mail servers, ftp servers, etc. Basically, your organization wants all of their servers up and running all of the time. Nagios 3 offers an easy set up and configuration to make this happen so that you can monitor multiple servers and have Nagios alert you to problems.

This is part two of a three part series on distributed monitoring. You can use passive service and host checks to allow non-central Nagios servers to collect data from a network of machines and then transfer that information to a central Nagios server.